Technical drawing pen sizes
Technical drawing pens follow the same size-ratio principle as A series paper sizes, that is, an aspect ration of 1:√2, with the progression proceeding by folding the preceding size in two. When an A size piece of paper is folded in two it retains its proportions.
The standard sizes for technical drawings pens also differ by a factor √2, ie. 2.00 mm, 1.40 mm, 1.00 mm, 0.70 mm, 0.50 mm, 0.35 mm, 0.25 mm, 0.18 mm, 0.13 mm.
This means for example that after drawing with a 0.35 mm pen on A3 paper and reducing it to A4, you can continue with the 0.25 mm pen. (ISO 9175-1).
[edit] Related articles on Designing Buildings
- Drawing board.
- Manual drafting techniques.
- Notation and units on drawings and documents.
- Paper sizes.
- Rotring.
- Scale drawing.
- Shop drawings.
- Standard hatching styles for drawings.
- Symbols on architectural drawings.
- T-square.
- Technical drawing pen sizes.
- Types of drawing.
- Types of paper.
- Technical drawing.
- Working drawings.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Construction Management, 2 June
Construction deaths halve in two years.
Green Book changes to drive investment in all parts of UK.
Minimum energy efficiency standards (MEES)
CIAT briefing on response to consultations for privately rented non-domestic properties.
Connect, collaborate, shape the future
Registration now live for UK Construction Week Birmingham.
CIOB announces Saul Humphrey FCIOB as new President for 26/27 term.
A quick, simple, and zero-bills solution to prevent overheating.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.